We will call you back soon!
Description
Fibers,250um,are positioned into a loose tube made of high modulus plastics. The uni-tube filled with a water-resistant filling compound. Water swell yarns and water swell tape are resistant to water and moist. The stranded layer of aramid yarns as strength member, the cable is completed with PE or AT(anti-tracking) outer sheath.
Characteristics
Can be installed without shutting off the power
Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25kv
Light weight and small diameter reducing the load caused by ice and wind and the load on towers
Large span lengths
Good performance of tensile strength and temperature
The design life span is 30years
Application
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power liner under 110kv, PE outer sheath is applied. For power lines equal to or over 110kv. AT outer sheath is applied. The design of aramid quantity and stranding process can satisfy the demand on various spans.
Temperature Range
Transport/Storage Temp | Installation Temp | Operation Temp |
-40℃~+70℃ | -30℃~+50℃ | -40℃~+70℃ |
Structural Characteristic
Fiber Count | 2~288 |
Loose Tube | Colored Fiber In Pbt Loose Tube, Filled With Fiber Gel |
Waterproof Layer | Water Blocking Tape, Water Blocking Yarns |
Strength member | aramid yarns |
Sheath | Polyethylene(PE) or AT |
Fiber Count |
Nominal Diameter (mm) |
Nominal Weight (kg/km) | Allowable Tensile Load (N) | Allowable Crush Resistance (N/100mm) | ||
Short Term | Long Term | Short Term | Long Term | |||
2~12 | 4-6 | 19 | 2700 | 1000 | 1000 | 300 |
